Fences
A permit is needed from the building inspector for all new fences prior to beginning any work. Keep in mind that Village ordinances require all fences to be maintained to avoid noticeable leaning, missing sections, broken supports and non-uniform heights.
Height
Fences in the rear or side yard may not exceed 6 feet. Fences in the street yard may not exceed 3½ feet. Corner lot side yard fences may be increased to a maximum of 6 feet but must be set back a minimum of 10 feet from the lot line. A supporting fence post that is set into the ground may exceed the heights specified above by 6 inches. Fences cannot exceed 2½ feet in height when located within a vision clearance triangle unless approved by Plan Commission.
Location
Fences may typically be located on the lot line and within the building setbacks established for each zoning district. A fence may not be located within a public drainage easement or
within a public right-of-way.
Aesthetics
The “good” (finished) side of a fence shall face toward the adjoining property and toward the public road right-of-way. Fence posts shall be placed on the inner side of the fence. Metal fence posts shall be set in concrete bases.
Prohibited Materials
No barbed wire, creosote-covered materials, electrified wire (except for underground dog containment electrical fences), or other injurious materials within a residentially zoned district. Such materials are also not allowed in non-residential districts, unless approved by a conditional use permit and site plan review.
Maintenance
Every fence shall be maintained in a condition of reasonable repair and not be allowed to become or remain in a condition of disrepair including noticeable leaning, missing sections, broken supports, non-uniform heights, and non-removal of noxious weeds or similar vegetation.
Sign up to our receive news alerts to your inbox
Stay up to date on the Village's activities, events, programs and operations by subscribing to our newsfeed.